Analysis and Selection between Alternative Solutions

From SEBoK
Jump to navigation Jump to search

Lead Author: Rick Adcock, Contributing Authors: Brian Wells, Scott Jackson, Janet Singer, Duane Hybertson


The "Systems Approach Applied to Engineered Systems" knowledge area is graciously sponsored by PPI.

This topic is part of the Systems Approach Applied to Engineered Systems knowledge area (KA). It describes knowledge related to the analysis and selection of a preferred solutionsolution from the possible options, which may have been proposed by Synthesizing Possible Solutions. Selected solution options may form the starting point for Implementing and Proving a Solution. Any of the activities described below may also need to be considered concurrentlyconcurrently with other activities in the systems approachsystems approach at a particular point in the life of a system-of-interestsystem-of-interest (SoI).

The activities described below should be considered in the contextcontext of the Overview of the Systems Approach topic at the start of this KA. The final topic in this KA, Applying the Systems Approach, considers the dynamic aspects of how these activities are used as part of the systems approach and how this relates in detail to elementselements of systems engineeringsystems engineering (SE).

System Analysis

System analysisSystem analysis is an activity in the systems approach that evaluates one or more systemsystem artifacts created during the activities involved in Synthesizing Possible Solutions, such as:

  • Defining assessment criteriaassessment criteria based on the required properties and behavior of an identified problemproblem or opportunityopportunity system situation.
  • Accessing the properties and behavior of each candidate solution in comparison to the criteria.
  • Comparing the assessments of the candidate solutions and identification of any that could resolve the problem or exploit the opportunities, along with the selection of candidates that should be further explored.

As discussed in Synthesizing Possible Solutions topic, the problem context for an engineered systemengineered system will include a logical or ideal system solution description. It is assumed that the solution that “best” matches the ideal one will be the most acceptable solution to the stakeholdersstakeholders. Note, as discussed below, the “best” solution should include an understanding of costcost and riskrisk, as well as effectivenesseffectiveness. The problem context may include a soft systemsoft system conceptualconceptual modelmodel describing the logical elements of a system to resolve the problem situation and how these are perceived by different stakeholders (Checkland 1999). This soft context view will provide additional criteria for the analysis processprocess, which may become the critical issue in selecting between two equally effective solution alternatives.

Hence, analysis is often not a one-time process of solution selection; rather, it is used in combination with problem understanding and solution synthesissynthesis to progress towards a more complete understanding of problems and solutions over time (see Applying the Systems Approach topic for a more complete discussion of the dynamics of this aspect of the approach).

Effectiveness Analysis

Effectiveness studies use the problem or opportunity system context as a starting point.

The effectiveness of a synthesized system solution will include performance criteria associated with both the system’s primary and enabling functionsfunctions. These are derived from the system’s purposepurpose, in order to enable the realization of stakeholder needs in one or more, wider system contexts.

For a product systemproduct system, there are a set of generic non-functional qualities that are associated with different types of solution patterns or technology, e.g., safetysafety, securitysecurity, reliabilityreliability, maintainabilitymaintainability, usability, etc. These criteria are often explicitly stated as parts of the domaindomain knowledge of related technical disciplines in technology domains.

For a service systemservice system or enterprise systementerprise system, the criteria will be more directly linked to the identified useruser needs or enterpriseenterprise goals. Typical qualities for such systems include agility, resilienceresilience, flexibilityflexibility, upgradeability, etc.

In addition to assessments of the absolute effectiveness of a given solution system, systems engineerssystems engineers must also be able to combine effectiveness with the limitations of cost and timescales included in the problem context. In general, the role of system analysis is to identify the proposed solutions which can provide some effectiveness within the cost and time allocated to any given iterationiteration of the systems approach (see Applying the Systems Approach for details). If none of the solutions can deliver an effectiveness level that justifies the proposed investment, then it is necessary to return to the original framing of the problem. If at least one solution is assessed as sufficiently effective, then a choice between solutions can be proposed.

Trade-Off Studies

In the context of the definition of a system, a trade-off study consists of comparing the characteristics of each candidate system element to those of each candidate system architecturearchitecture in order to determine the solution that globally balances the assessment criteria in the best way. The various characteristics analyzed are gathered in cost analysis, technical risks analysis, and effectiveness analysis (NASA 2007). To accomplish a trade off study, there are a variety of methods, often supported by tooling. Each class of analysis is the subject of the following topics:

  • Assessment criteria are used to classify the various candidate solutions. They are either absolute or relative. For example, the maximum cost per unit produced is c$, cost reduction shall be x%, effectiveness improvement is y%, and risk mitigation is z%.
  • BoundariesBoundaries identify and limit the characteristics or criteria to be taken into account at the time of analysis (e.g., the kind of costs to be taken into account, acceptable technical risks, and the type and level of effectiveness).
  • Scales are used to quantify the characteristics, properties, and/or criteria and to make comparisons. Their definition requires knowledge of the highest and lowest limits, as well as the type of evolution of the characteristic (linear, logarithmic, etc.).
  • An assessment scoreassessment score is assigned to a characteristic or criterion for each candidate solution. The goal of the trade-off study is to succeed in quantifying the three variables (and their decomposition in sub-variables) of cost, risk, and effectiveness for each candidate solution. This operation is generally complex and requires the use of models.
  • The optimization of the characteristics or properties improves the scoring of interesting solutions.

A decision-making process is not an accurate science; ergo, trade-off studies have limits. The following concerns should be taken into account:

  • Subjective Criteria – personal bias of the analyst; for example, if the component has to be beautiful, what constitutes a “beautiful” component?
  • Uncertain Data – for example, inflation has to be taken into account to estimate the cost of maintenance during the complete life cyclelife cycle of a system; how can a systems engineer predict the evolution of inflation over the next five years?
  • Sensitivity Analysis – A global assessment score that is designated to every candidate solution is not absolute; thus, it is recommended that a robust selection is gathered by performing a sensitivity analysis that considers small variations of assessment criteria values (weights). The selection is robust if the variations do not change the order of scores.

A thorough trade-off study specifies the assumptions, variables, and confidence intervals of the results.

Systems Principles of System Analysis

From the discussions above, the following general principlesprinciples of systems analysis can be defined:

  • Systems analysis is an iterative activity consisting of trade studies made between various solution options from the systems synthesis activity.
  • Systems analysis uses assessment criteria based upon a problem or opportunity system description.
    • These criteria will be based around an ideal system description that assumes a hard systemhard system problem context can be defined.
    • The criteria must consider required system behavior and properties of the complete solution in all of the possible wider system contexts and environments.
    • Trade studies require equal consideration to the primary system and the enabling system working as a single system to address the user need. These studies need to consider system requirements for Key Performance Parameters (KPPs), systems safety, security, and affordability across the entire life cycle.
    • This ideal system description may be supported by soft systemsoft system descriptions from which additional “soft” criteria may be defined (e.g., a stakeholder preference for or against certain kinds of solutions and relevant social, political, or cultural conventions to be considered in the likely solution environment, etc.).
  • At a minimum, the assessment criteria should include the constraints on cost and time scales acceptable to stakeholders.
  • Trade studies provide a mechanism for conducting analysis of alternative solutions.
    • A trade study should consider a “system of assessment criteria,” designating special attention to the limitations and dependencies between individual criteria.
    • Trade studies need to deal with both objective and subjective criteria. Care must be taken to assess the sensitivity of the overall assessment to particular criteria.

References

Works Cited

Checkland, P.B. 1999. Systems Thinking, Systems Practice. Chichester, UK: John Wiley & Sons Ltd.

NASA. 2007. Systems Engineering Handbook, Revision 1. Washington, D.C., USA: National Aeronautics and Space Administration (NASA). NASA/SP-2007-6105.

Primary References

ISO/IEC/IEEE. 2015. Systems and Software Engineering -- System Life Cycle Processes. Geneva, Switzerland: International Organisation for Standardisation/International Electrotechnical Commissions/Institute of Electrical and Electronics Engineer. ISO/IEC/IEEE 15288:2015.

Jackson, S., D. Hitchins and H. Eisner. 2010. "What is the systems approach?" INCOSE Insight, vol. 13, no. 1, April, pp. 41-43.

Additional References

None.


< Previous Article | Parent Article | Next Article >
SEBoK v. 2.10, released 06 May 2024