Concepts of Systems Thinking
This article forms part of the Systems Thinking Knowledge Area. It describes systems concepts , knowledge that can be used to understand problems and solutions to support systems thinking.
The concepts below have been synthesized from a number of sources, which are themselves summaries of concepts from other authors. Ackoff (1971) proposed a system of system concepts as part of general system theory (GST); Skyttner (2001) describes the main GST concepts from a number of systems science authors; Flood and Carlson (1993) give a description of concepts as an overview of systems thinking; Hitchins (2007) relates the concepts to systems engineering practice; and Lawson (2010) describes a system of system concepts where systems are categorized according to fundamental concepts, types, topologies, focus, complexity, and roles.
Wholeness and Interaction
A system is defined by a set of elements which exhibit sufficient cohesion , or "togetherness", to form a bounded whole(Hitchins 2007, Boardman and Sauser 2008).
According to Hitchins, interaction between elements is the "key" system concept (Hitchins 2009, p. 60). The focus on interactions and holism is a push-back against the perceived reductionist focus on parts and provides recognition that in complex systems, the interactions among parts is at least as important as the parts themselves.
An open system is defined by the interactions between system elements within a system boundary and by the interaction between system elements and other systems within an environment . (See What is a System?) The remaining concepts below apply to open systems.
Regularity
regularity is a uniformity or similarity that exists in multiple entities or at multiple times (Bertalanffy 1968). Regularities make science possible and engineering efficient and effective. Without regularities, we would be forced to consider every natural and artificial system problem and solution as unique. We would have no scientific laws, no categories or taxonomies, and each engineering effort would start from a clean slate.
Similarities and differences exist in any set or population. Every system problem or solution can be regarded as unique, but no problem/solution is in fact entirely unique. The nomothetic approach assumes regularities among entities and investigates what the regularities are. The idiographic approach assumes each entity is unique and investigates the unique qualities of entities, (Bertalanffy 1975).
A very large amount of regularity exists in both natural systems and engineered systems. Patterns of systems thinking capture and exploit that regularity.
State and Behavior
Any quality or property of a system element is called an attribute. The state of a system is a set of system attributes at a given time. A system event describes any change to the environment)of a system, and hence its state:
- Static - A single state exists with no events.
- Dynamic - Multiple possible stable states exist.
- Homeostatic - System is static but its elements are dynamic. The system maintains its state by internal adjustments.
A stable state is one in which a system will remain until another event occurs.
State can be monitored using state variables, values of attributes which indicate the system state. The set of possible values of state variables over time is called the "'state space'". State variables are generally continuous, but can be modeled using a finite state model (or, "state machine").
Ackoff (1971) considers "change" to be how a system is affected by events, and system behavior as the effect a system has upon its environment. A system can
- react to a request by turning on a light,
- respond to darkness by deciding to turn on the light
- act to turn on the lights at a fixed time, randomly or with discernible reasoning.
A stable system is one which has one or more stable states within an environment for a range of possible events:
- Deterministic systems have a one-to-one mapping of state variables to state space, allowing future states to be predicted from past states.
- Non-Deterministic systems have a many-to-many mapping of state variables; future state cannot be reliably predicted.
The relationship between determinism and system complexity, including the idea of chaotic systems, is further discussed in the Complexity article.
Survival Behavior
Systems often act to continue to exist, behaving to sustain themselves in one or more alternative viable states. Many natural or social systems have this goal, either consciously or as a "self organizing" system, arising from the interaction between elements.
entropy is the tendency of systems to move towards disorder or disorganization. In physics, entropy is used to describe how “organized” heat energy is “lost” into the “random” background energy of the surrounding environment; e.g. 2nd Law of Thermodynamics. A similar effect can be seen in engineered systems. What happens to a building or garden, which is left unused for any time? Entropy can be used as a metaphor for aging, skill fade, obsolescence, misuse, boredom, etc.
"Negentropy" describes the forces working in a system to hold off entropy. homeostasis is the biological equivalent of this, describing behavior which maintains a "steady state" or "dynamic equilibrium". Examples in nature include human cells, which maintain the same function while replacing their physical content at regular intervals. Again this can be used as a metaphor for the fight against entropy, e.g. training, discipline, maintenance, etc.
(Hitchins 2007) describes the relationship between the viability of a system and the number of connections between its elements. Hitchins' concept of "connected variety" states that stability of a system increases with its connectivity (both internally and with its environment). See variety.
Goal Seeking Behavior
Some systems have reasons for existence beyond simple survival. Goal seeking is one of the defining characteristics of engineered systems:
- A goal is a specific outcome which a system can achieve in a specified time
- An objective is a longer term outcome which can be achieved through a series of goals.
- An ideal is an objective which cannot be achieved with any certainty, but for which progress towards the objective has value.
Systems may be single goal seeking (perform set tasks), multi-goal seeking (perform related tasks) or reflective (set goals to tackle objectives or ideas). There are two types of goal seeking systems:
- purposive systems have multiple goals, with some shared outcome. Such a system can be used to provide pre-determined outcomes, within an agreed time period. Such a system may have some freedom to choose how to achieve the goal. If it has memory it may develop processes describing the behaviors needed for defined goals. Most machines or software systems are purposive.
- purposeful systems are free to determine the goals needed to achieve an outcome. Such a system can be tasked to pursue objectives or ideals over a longer time through a series of goals. Humans and sufficiently complex machines are purposeful.
Control Behavior
cybernetics , the science of control, defines two basic control mechanisms:
- Negative feedback, maintaining system state against a set objectives or levels.
- Positive feedback, forced growth or contraction to new levels.
One of the main concerns of cybernetics is the balance between stability and speed of response. A black-box system view looks at the whole system. Control can only be achieved by carefully balancing inputs with outputs which reduces speed of response. A white-box system view considers the system elements and their relationships; here control mechanisms can be imbedded into this structure giving more responsive control and associated risks to stability.
Another useful control concept is that of a "meta-system", which sits over the system and is responsible for controlling its functions, either as a black-box or white-box. In this case, behavior arises from the combination of system and meta-system.
Control behavior is a trade between
- Specialization, the focus of system behavior to exploit particular features of its environment.
- flexibility , the ability of a system to adapt quickly to environmental change.
While some system elements may be optimized for for either specialization, a temperature sensitive switch, or flexibility, an autonomous human controller, complex systems must strike a balance between the two for best results. This is an example of the concept of dualism discussed in more detail in Principles of Systems Thinking.
variety describes the number of different ways elements can be controlled, dependent on the different ways in which then can be combined. The law of requisite variety (Ashby 1956) states that a control system must have at least as much variety as the system it is controlling.
Function
Ackoff defines function as outcomes which contribute to goals or objectives. To have a function, a system must be able to provide the outcome in two or more different ways (this is called Equifinality).
This view of function and behavior is common in systems science. In this paradigm all system elements have behavior of some kind, but to be capable of functioning in certain ways requires a certain richness of behaviors.
In most hard systems approaches (Flood and Carson 1993) a set of functions are described from the problem statement, and then associated with one or more alternative element structures. This process may be repeated until a system component (implementable combinations of function and structure) has been defined (Martin 1997). Here "function" is defined as a task or activity that must be performed to achieve a desired outcome; or as a "transformation" of inputs to outputs. This transformation may be
- Synchronous, a regular interaction with a closely related system.
- Asynchronous, an irregular response to a demand from another system, often triggering a set response.
The behavior of the resulting system is then assessed as a combination of function and effectiveness. In this case behavior is seen as an external property of the system as a whole, and often described as analogous to human or organic behavior (Hitchins 2009).
Hierarchy, Emergence and Complexity
System behavior is related to combinations of element behaviors. Most systems exhibit increasing variety; i.e., they have behavior resulting from the combination of element behaviors. The term "synergy", or weak emergence, is used to describe the idea that “the whole is greater than the sum of the parts”. While this is generally true, it is also possible to get reducing variety in which the whole function is less than the sum of the parts, Hitchins (2007).
Complexity frequently takes the form of hierarchies ; hierarchic systems have some common properties independent of their specific content; hierarchic systems will evolve far more quickly than non-hierarchic systems of comparable size Simon (1996). A natural system hierarchy is a consequence of wholeness, with strongly cohesive elements grouping together forming structures which reduce complexity and increase robustness (Simons 1962).
encapsulation , is the enclosing of one thing within another or the degree to which it is enclosed. System encapsulation encloses system elements and their interactions from the external environment, and usually involves a system boundary that hides the internal from the external. For example, the internal organs of the human body can be optimized to work effectively within tighly defined conditions because they are protected from extremes of environmental change.
Socio-technical systems form "control hierarchies", with systems at a higher level having some ownership of control over those at lower levels. Hitchins (2009) describes how systems form "preferred patterns" which can be used to the enhanced stability of interacting systems hierarchies.
Looking across a hierarchy of systems generally reveals increasing complexity at the higher level, relating to both the structure of the system and how it is used. The terms emergence describes behaviors emerging across a complex system hierarchy.
Effectiveness, Adaptation and Learning
Systems effectiveness is a measure of the system's ability to perform the functions necessary to achieve goals or objectives. Ackoff (1971) defines this as the product of the number of combinations of behavior to reach a function and the efficiency of each combination.
Hitchins (2007) describes effectiveness as a combination of performance (how well a function is done in ideal conditions), availability (how often the function is there when needed) and survivability (how likely is it that the system will be able to use the function fully).
System elements and their environment change in a positive, neutral or negative way in individual situations. An adaptive system is one that is able to change itself or its environment if its effectiveness is insufficient to achieve its current or future goals or objectives. (Ackoff, 1971) defines four types of adaptation, changing the environment or the system, in response to internal or external factors.
A system may also learn, improving its effectiveness over time, without any change in state or goal.
References
Works Cited
Ackoff, R.L. 1971. "Towards a System of Systems Concepts". Management Science. 17(11).
Ashby, W R. 1956. "Chapter 11". Introduction to Cybernetics. London, UK: Wiley.
Bertalanffy, L. von. 1968. General System Theory: Foundations, Development, Applications, Revised ed. New York, NY, USA: Braziller.
Bertalanffy, L. von. 1975. Perspectives on General System Theory. E. Taschdjian, ed. New York: George Braziller.
Boardman, J. and B. Sauser. 2008. Systems Thinking: Coping with 21st Century Problems Boca Raton, FL, USA: Taylor & Francis.
Flood, R.L. and E.R. Carson. 1993. Dealing With Complexity: An Introduction to the Theory and Application of Systems Science. New York, NY, USA: Plenum Press.
Hitchins, D. 2007. Systems Engineering: A 21st Century Systems Methodology. Hoboken, NJ, USA: John Wiley and Sons.
Hitchins, D. 2009. "What are the General Principles Applicable to Systems?" INCOSE Insight. 12(4): 59-63.
Lawson, H. 2010. A Journey Through the Systems Landscape. London, UK: College Publications, Kings College.
Martin J. N. 1997. Systems Engineering Guidebook. Boca Raton, FL, USA: CRC Press.
Skyttner, L. 2001. General Systems Theory: Ideas and Applications. Singapore: World Scientific Publishing Co. p. 53-69.
Simon, H. A. 1962. "The Architecture of Complexity." Proceedings of the American Philosophical Society. 106(6) (Dec. 12, 1962): 467-482.
Simon, H. 1996. The Sciences of the Artificial, 3rd ed. Cambridge, MA: MIT Press.
Primary References
Ackoff, R.L. 1971. "Towards a System of Systems Concept." Management Science. 17(11).
Hitchins, D. 2009. "What are the General Principles Applicable to Systems?" INCOSE Insight. 12(4): 59-63.
Additional References
Edson, Robert. 2008. Systems Thinking. Applied. A Primer. Arlington, VA, USA: Applied Systems Thinking Institute (ASysT), Analytic Services Inc.
Hitchins, D. 2007. Systems Engineering: A 21st Century Systems Methodology. Hoboken, NJ, USA: John Wiley & Sons.
Jackson, S., D. Hitchins, and H. Eisner. 2010. "What is the Systems Approach?" INCOSE Insight. 13(1) (April 2010): 41-43.
Waring, A. 1996. "Chapter 1." Practical Systems Thinking. London, UK: International Thomson Business Press.
SEBoK Discussion
Please provide your comments and feedback on the SEBoK below. You will need to log in to DISQUS using an existing account (e.g. Yahoo, Google, Facebook, Twitter, etc.) or create a DISQUS account. Simply type your comment in the text field below and DISQUS will guide you through the login or registration steps. Feedback will be archived and used for future updates to the SEBoK. If you provided a comment that is no longer listed, that comment has been adjudicated. You can view adjudication for comments submitted prior to SEBoK v. 1.0 at SEBoK Review and Adjudication. Later comments are addressed and changes are summarized in the Letter from the Editor and Acknowledgements and Release History.
If you would like to provide edits on this article, recommend new content, or make comments on the SEBoK as a whole, please see the SEBoK Sandbox.
blog comments powered by Disqus