Difference between revisions of "Manufacturability and Producibility"

Revision as of 13:50, 8 September 2011

Manufacturability and producibility is an engineering specialty. The machines and processes used to build a system must be architected and designed. Manufacturing equipment and processes can sometimes cost more than the system being built, and so a systems engineering approach to manufacturing and production is necessary (Maier and Rechtin 2002). Manufacturability and producibility can be a discriminator between competing system solution concepts and therefore must be considered early in the study period, as well as during the maturing of the final design solution.

Multiple Systems

The system being built might beone-of-a-kind, or intended to be reproduced multiple times. The manufacturing system is different for each of these situations and is tied to the type of system being built. For example, the manufacture of a single board computer would be vastly different from the manufacture of an automobile. Production involves the repeated building of the designed system. Multiple production cycles require the consideration of production machine maintenance and downtime.

Manufacturing and Production Engineering

Manufacturing and production engineering involves similar systems engineering processes specifically tailored to the building of the system. Manufacturability and producibility are the key attributes of a system that determine the ease of manufacturing and production. While manufacturability is simply the ease of manufacture, producibility also encompasses other dimensions of the production task, including packaging and shipping. Both these attributes can be improved by incorporating proper design decisions that take into account the entire system life cycle (Blanchard and Fabrycky 2005).

References

Citations

Maier, M., and E. Rechtin. 2002. The art of systems architecting. 2nd ed. Boca Raton, FL, USA: CRC Press.

Blanchard, B. S., and W. J. Fabrycky. 2005. Systems engineering and analysis. Prentice-hall international series in industrial and systems engineering. 4th ed. Englwood Cliffs, NJ, USA: Prentice-Hall.

Primary References

No primary references have been identified for version 0.5. Please provide any recommendations on additional references in your review.

Additional References

No additional references have been identified for version 0.5. Please provide any recommendations on additional references in your review.

Article Discussion

[Go to discussion page]

<- Previous Article | Parent Article | Next Article ->

Signatures

--Bkcase 19:10, 22 August 2011 (UTC) (on behalf of Dick Fairley)

--Asquires 16:58, 1 September 2011 (UTC)Short and sweet

--Rturner 13:50, 8 September 2011 (UTC) Tech edit

@@ Line 1: / Line 1: @@
-Manufacturability and producibility is an engineering specialty. The machines and processes used to build a system must be architected and designed. Manufacturing equipment and processes can sometimes cost more than the system being built, and so a systems engineering approach to manufacturing and production is necessary (Maier and Rechtin 2002).  Manufacturability and producibility can be a discriminator between competing system solution concepts and therefore needs to be considered early in the study period, as well as during the maturing of the final design solution.
+Manufacturability and producibility is an engineering specialty. The machines and processes used to build a system must be architected and designed. Manufacturing equipment and processes can sometimes cost more than the system being built, and so a systems engineering approach to manufacturing and production is necessary (Maier and Rechtin 2002).  Manufacturability and producibility can be a discriminator between competing system solution concepts and therefore must be considered early in the study period, as well as during the maturing of the final design solution.
 ==Multiple Systems==
-The system being built might be a one-of-a-kind, or it might be intended to be reproduced multiple times. The manufacturing system is different for each of these situations and is tied to the type of system being built. For example, the manufacture of a single board computer would be vastly different from the manufacture of an automobile. Production involves the repeated building of the designed system. Multiple production cycles require the consideration of production machine maintenance and downtime.
+The system being built might beone-of-a-kind, or intended to be reproduced multiple times. The manufacturing system is different for each of these situations and is tied to the type of system being built. For example, the manufacture of a single board computer would be vastly different from the manufacture of an automobile. Production involves the repeated building of the designed system. Multiple production cycles require the consideration of production machine maintenance and downtime.
 ==Manufacturing and Production Engineering==
@@ Line 25: / Line 25: @@
 --[[User:Asquires|Asquires]] 16:58, 1 September 2011 (UTC)Short and sweet
+--[[User:Rturner|Rturner]] 13:50, 8 September 2011 (UTC) Tech edit
 [[Category:Part 6]][[Category:Topic]]